PhD Theses
|
|
PhD and Licentiate Theses published by the Swedish Ceramic
Institute/Ceramic Technology, Chalmers University of Technology
|
|
Biomaterial Components Prepared by Titanium Powder Technology,
Eriksson M, Ph D Thesis, Ceramic Technology, Göteborg 2004,
abstract |
|
Continuous Fibre Reinforced Oxide/Oxide
Composites, Holmquist M, Ph. D. Thesis, Ceramic
Technology/Department of Materials and Surface Technology,
Chalmers University of Technology, Göteborg 2003, abstract
|
|
Water-based
Tape Casting of Ceramics and Fabrication of Ceramic
Laminates, Kristoffersson A, Ph D. Thesis,
Chalmers University of Technology/Swedish Ceramic
Institute, Göteborg 1999, abstract
|
|
Oxide
Ceramic Matrix Composites for Gas Turbine Applications,
Holmquist, M, Licentiate Thesis, Department of Ceramic
Technology, Chalmers University of Technology, Göteborg
1999, abstract
|
|
Engineering
Ceramics for Tribological Systems – Manufacture, Properties and Testing,
Kahlman L, Ph D Thesis, Chalmers University of
Technology/ Swedish Ceramic Institute, Göteborg,
1997, abstract
|
|
Silicon
Carbide and Silicon Nitride Ceramics Based on
Colloidal Processing and Sol-Gel Techniques, Lidén
E, Ph. D. Thesis, Chalmers University of
Technology/Swedish Ceramic Institute, Göteborg 1994, abstract
|
|
Fibre
Reinforced Ceramic Composites, Lundberg R, Ph D
Thesis, Chalmers University of Technology, Göteborg
1989
|
|
Slip
Casting and Pressing of Ceramics based on Colloidal
Processing Techniques, Persson M,
Ph D Thesis, Chalmers University of Technology,
Göteborg, 1989
|
|
Defect
Minimisation in Silicon Carbide, Silicon Nitride and
Alumina Ceramics, Carlström E, Ph. D. Thesis,
Chalmers University of Technology, Göteborg, 1989
|
|
If you want a copy of any of above theses, please
contact us. |
|
