Publications – Engineering
Ceramics
1995–1999
|
|
|
| 1999 |
| 99-1kk |
Clegg
W J, Andrees G, Carlström E, Lundberg R, Kristoffersson A,
Meistring R, Menessier E and Schoberth A, "The
Properties of Ceramic Laminates", Ceram. Eng. Sci.
Proc., 20 [4] 421-426 (1999). |
| 99-2kk |
Kristoffersson
A, Roncari E, Carlsson R and Galassi C, "Anisotropic
Sintering Shrinkage of Tape-Cast Alumina", pp. 435-442
in "Ceramics: Getting into the 2000’s" Part B
Advances in Science and Technology 14, Proceedings of 9th
Cimtec ’98, ed. by P. Vincenzini, Elsevier, 1999. |
| 99-3kk |
Rundgren
K, Iwamoto Y and Matsubara H, "In-situ Reinforced
Si3N4". In "Ceramics:
Getting into the 2000’s" Part B Advances in Science
and Technology 12, Proceedings of 9th Cimtec ’98, ed. by
P. Vincenzini, Elsevier, 1999. |
| 99-4kk |
Tarì
G, Lyckfeldt O and Ferreira J M F, "Influence of
Different Amounts of Magnesia on Rheological Properties of
Alumina. In "Ceramics: Getting into the 2000’s"
Part B Advances in Science and Technology 12, Proceedings of
9th Cimtec ’98, ed. by P. Vincenzini, Elsevier, 1999. |
| 99-5kk |
Brännvall
P and Rundgren K, "Grain Growth Mechanisms in In-Situ
Reinforced Si3N4", pp. 7-8 in
Sixth ECerS Conference & Exhibition of the European
Ceramic Society, Extended Abstracts Volume 2, British
Ceramic Proceedings No. 60, IOM Communications Ltd, 1999. |
| 99-6kk |
Carlinger
L and Carlström E, "The Influence of the Granule
Structure on the Strength of Pressed and Sintered Si3N4",
pp. 43-44 in Sixth ECerS Conference & Exhibition of the
European Ceramic Society, Extended Abstracts Volume 2,
British Ceramic Proceedings No. 60, IOM Communications Ltd,
1999. |
| 99-7kk |
Lyckfeldt
O, "Novel Water-based Shaping of Ceramic
Components", pp. 219-220 in Sixth ECerS Conference
& Exhibition of the European Ceramic Society, Extended
Abstracts Volume 2, British Ceramic Proceedings No. 60, IOM
Communications Ltd, 1999. |
| 99-8kk |
Kristoffersson
A and Lidén E, "Stability of Alumina Suspensions for
Aqueous Tape Casting Using Latex Binders", pp. 225-226
in Sixth ECerS Conference & Exhibition of the European
Ceramic Society, Extended Abstracts Volume 2, British
Ceramic Proceedings No. 60, IOM Communications Ltd, 1999. |
| 99-9kk |
Kristoffersson
A, Vandeperre L, Koenig V, Carlström E and Clegg W J,
"Thermal Shock Resistance of ZrO2-Al2O3/Al2O3
Laminates", pp. 425-426 in Sixth ECerS Conference &
Exhibition of the European Ceramic Society, Extended
Abstracts Volume 2, British Ceramic Proceedings No. 60, IOM
Communications Ltd, 1999. |
| 99-10kk |
Holmquist M
and Kristoffersson A, "Processing and Properties of an
Oxide Ceramic Matrix/Oxide Fibre Woven Fabric
Composite", pp. 427-428 in Sixth ECerS Conference &
Exhibition of the European Ceramic Society, Extended
Abstracts Volume 2, British Ceramic Proceedings No. 60, IOM
Communications Ltd, 1999.
|
| 99-11kk |
Legin-Eyzop
B and Karlsson S, "Cyclic Contact Fatigue of Silicon
Nitride", Wear, 225-229, 1303-1308 (1999).
|
| 99-12kk |
Chen
J, Li C, Fu Z, Tu X, Sundberg M and Pompe R, "Low
Temperature Oxidation Behavior of a MoSiO2-based
Material", Mat. Sci. Eng., A261, 239-244 (1999) |
| 99-13kk |
Byman-Fagerholm
H, Mikkola P, Rosenholm J B, Lidén E and Carlsson R,
"The Influence of Lignosulphonate on the Properties of
Single and Mixed Si3N4 and ZrO2-Suspensions",
J. Eur. Ceram. Soc. 19, 41-48 (1999). |
| 99-14kk |
Kahlman
L and Hutchings I M, "Effect of Particulate
Contamination in Grease-Lubricated Hybrid Rolling
Bearings". Tribology Transactions, Vol. 42 [4]
842-850 (1999). |
| 99-15kk |
Zupancic A, Lapasin R and Kristoffersson A, "Rheological
Properties of Aqueous a -Al2O3
Suspensions: Influence of Dispersant Concentration".
Submitted to J. of Canadian Ceram. Soc, 1999.
|
| 99-16kk |
Falk
L, Karlsson G, Bovin J-O, Lidén E and Carlinger L,
"Cryo Electron Microscopy of Particle Interaction in an
Aqueous Suspension". Presented at Scandem –99, 51st
Annual meeting of the Scandinavian Society for Electron
Microscopy, Bergen, Norway 2-5 June, 1999. |
| 99-17kk |
Carlström
E, "Factory in a Box", Report, Institute of
Technology, Department of Mechanical Engineering, Linköping
University, 1999 |
| 99-18kk |
Kristoffersson
A, "Water-based Tape Casting of Ceramics
and
Fabrication of Ceramic Laminates", Ph D. Thesis,
Chalmers University of Technology/Swedish Ceramic Institute,
Göteborg 1999 (abstract)
|
| 99-19kk |
Holmquist,
M "Oxide Ceramic Matrix Composites for Gas Turbine
Applications", Licentiate Thesis, Department of Ceramic
Technology, Chalmers University of Technology, Göteborg
1999 (abstract). |
|
| 1998 |
| 98-1kk |
Lyckfeldt O and Ferreira J M F,
"Processing of Porous Ceramics by 'Starch Consolidation'
", J. Eur. Ceram. Soc., 18, 131–140 (1998). |
| 98-2kk |
Tarì G, Ferreira J M F, Fonseca A T and
Lyckfeldt O, "Influence of Particle Size Distribution on
Colloidal Processing of Alumina", J. Eur. Ceram. Soc., 18,
249–253 (1998).
|
| 98-3kk |
Zupancic A, Lapasin R and
Kristoffersson A, "Influence of Particle Concentration on
Rheological Properties of Aqueous a -Al2O3
Suspensions", J. Eur. Ceram. Soc., 18, 467–477 (1998). |
| 98-4kk |
Tarì G, Ferreira J M F and Lyckfeldt O,
"Influence of the Stabilising Mechanism and Solid Loading on
Slip Casting of Alumina", J. Eur. Ceram. Soc., 18, 479–486
(1998). |
| 98-5kk |
Blanks K S, Kristoffersson A, Carlström E and
Clegg W J, "Crack Deflection in Ceramic Laminates Using Porous
Interlayers", J. Eur. Ceram. Soc., 18, 1945–1951
(1998). |
| 98-6kk |
Kishi K, Umebayashi S, Tani E, Shobu K, Pompe R
and Kristoffersson A, "Effect of Sedimentation and Flocculation
Pre-treatment of Starting Si3N4 and Al2O3
Powders on Room Temperature Strength of b
-sialon (z = 1), J. Eur. Ceram. Soc., 18, 2015–2018 (1998). |
| 98-7kk |
Kristoffersson A, Roncari E and Galassi C,
"Comparison of Different Binders for Water-Based Tape Casting
of Alumina", J. Eur. Ceram. Soc., 18, 2123–2131
(1998).
|
| 98-8kk |
Kristoffersson A, Lapasin R and Galassi C,
"Study of Interactions between Polyelectrolyte Dispersants,
Alumina and Latex Binders by Rheological Characterisation", J.
Eur. Ceram. Soc., 18, 2133–2140 (1998). |
| 98-9kk |
Nyborg L and Carlström E, "Raw Materials
for Powder Injection Moulding", in Special Interest Seminar at
the 1998 Powder Metallurgy World Congress and Exhibition",
European Powder Metallurgy Association, 1998. |
| 98-10kk |
Magelhães S, Nyborg L, Lyckfeldt O and
Carlström E, "Pressureless Net Shape Manufacture of PM
Parts", pp. 308-313 in Proceedings of the Powder Metallurgy
World Congress & Exhibition 1998, European Powder Metallurgy
Association, 1998. |
| 98-11kk |
Rudnayová E, Ballóková B, Dusza J and
Rundgren K, "Indentation Load/Size Effect at the Microhardness
Measurement of Si3N4 Grains", pp. 405–408
in Proceedings of the 10th International Symposium Metallography ’98,
ed. I. Hrivnák, Faculty of Metallurgy, Technical University,
Slovakia, 1998. |
| 98-12kk |
Nyborg L, Carlström E, Warren A and
Bertilsson H, "Guide to Injection Moulding of Ceramics and
Hardmetals: Special Consideration of Fine Powder", Powder
Metallurgy, 41 [1] 41–45 (1998). |
| 98-13kk |
Lofaj F, Rundgren K, Okada A and Kawamoto H,
"Effective Young's Modulus and Microhardness Anisotropy in
ß-Si3N4 Grains", Fortschritte in der
Metallographie, Special Volume, 1998 |
| 98-14kk |
Carlsson R, "Alternativa formmaterial vid
tillverkning av keramik, SKS kurskompendium "Formar och
formmaterial i keramisk industri", 6 sidor, 1998. |
| 98-15kk |
Lyckfeldt O, "Gjutslammors reologi
vid slamgjutning/ tryckslam- gjutning. Nya formningsmetoder –
direktkonsolideringstekniker,
SKS kurskompendium "Formar och formmaterial i keramisk
industri", 7 sidor, 1998. |
|
| 1997 |
| 97-1kk |
Clegg W J, Andrees G, Carlström E, Lundberg R,
Kristoffersson A, Meistring R, Menessier E and Schoberth A,
"The Properties of Silicon Carbide Laminates", pp. 118–123
in proceedings of the 6th International Symposium on Ceramic
Materials and Components for Engines, ed. by K Niihara, S Hirano, S
Kanzaki, K Komeya and K Morinaga, Japan Fine Ceramics Association,
1997. |
| 97-2kk |
Chen J, Heim M and Pompe R, "Oxidation
Kinetics of Silicon Nitride Ceramics: Influences of the
Crystallisation and Additive Enrichment in the Oxide Scale",
pp. 853–860 in Materials Science Forum Vols. 251–254, 1997. |
| 97-3kk |
Dusza J, Eschner T and Rundgren K,
"Hardness Anisotropy in Bimodal Grained Gas Pressure Sintered
Si3N4", J. Mater. Sci. Letters, 16,
1664-1667 (1997). |
| 97-4kk |
Kristoffersson A and Carlström E, "Tape
Casting of Alumina in Water with an Acrylic Latex Binder", J.
Eur. Ceram Soc., 17, 289-297 (1997). |
| 97-5kk |
Lindqvist K and Lidén E, "Preparation of
Alumina Membranes by Tape Casting and Dip Coating", J. Eur.
Ceram. Soc., 17, 359-366 (1997). |
| 97-6kk |
Heim M, Chen J and Pompe R, "Wet and Salt
Corrosion of a Porous Si2N2O-ZrO2
Composite Material", J. Eur. Ceram. Soc., 17, 905-911
(1997). |
| 97-7kk |
Björklund H, Falk L K L, Rundgren K and Wasén
J, "ß-Si3N4 Grain Growth, Part I: Effect
of Metal Oxide Sintering Additives", J. Eur. Ceram. Soc., 17
1285-1299 (1997). |
| 97-8kk |
Tarì G, Ferreira J M F and Lyckfeldt O,
"Influence of Magnesia on Colloidal Processing of
Alumina", J. Eur. Ceram. Soc., 17, 1341-1350 (1997). |
| 97-9kk |
Törncrona A, Brandt J, Lowendahl L and
Otterstedt J-E, "Sol-gel Coating of Alumina Fibre
Bundles", J. Eur. Ceram. Soc., 17, 1459-1465 (1997). |
| 97-10kk |
Heim M, O'Meara
C, Chen J, Gatt R and Pompe R, "On the Oxidation Kinetics of an
Si2N2O-ZrO2 Composite
Material", J. Electrochem. Soc., 144 [8] 2740-2744
(1977). |
| 97-11kk |
Axén N, Kahlman L and Hutchings I M,
"Correlations Between Tangential Force and Damage Mechanisms in
the Scratch Testing of Ceramics", Tribology Int., 30 [7]
467-474 (1997). |
| 97-12kk |
Heim M, Chen J and Pompe R, "Dry and Wet
Oxidation of an Si2N2O-ZrO2
Composite Material", J. Mater. Sci., 32, 4025-4030
(1997). |
| 97-13kk |
Bergström L, Carlström E and Carlsson R,
"Novel Ceramic Processing Methods Using Responsive
Polymers", pp. 12-13 in Euro Ceramics V, (extended abstracts),
Key Engineering Materials, Vol. 132-136, Part 1, ed. by D.
Bortzmeyer, M. Boussage, Th. Chartier, G. Fantozzi, G. Lozes and A.
Rousset, Trans Tech Publications, Switzerland 1997. |
| 97-14kk |
Holmquist M, Kristoffersson A, Lundberg R and
Adlerborn A, "Hot Isostatically Pressed Silicon Carbide
Fibre/Mullite Composites", pp. 239-246 in Key Engineering
Materials Vols. 127-131, Trans Tech Publications, Switzerland 1997. |
| 97-15kk |
Lyckfeldt O and Ferreira J M F,
"Colloidal Processing of Alumina with MgO Additions", pp.
313-316 in Euro Ceramics V, (extended abstracts), Key Engineering
Materials, Vol. 132-136, Part 1, ed. by D. Bortzmeyer, M. Boussage,
Th. Chartier, G. Fantozzi, G. Lozes and A. Rousset, Trans Tech
Publications, Switzerland 1997.
|
| 97-16kk |
Ferreira J M F,
Tarì G and Lyckfeldt O,
"Influence of Magnesia on Drying-Shrinkage Behaviour of
Alumina, pp. 358-361 in Euro Ceramics V, (extended abstracts), Key
Engineering Materials, Vol. 132-136, Part 1, ed. by D. Bortzmeyer,
M. Boussage, Th. Chartier, G. Fantozzi, G. Lozes and A. Rousset,
Trans Tech Publications, Switzerland 1997. |
| 97-17kk |
Heim M, O'Meara C, Chen J, Gatt R and Pompe R,
"High Temperature Corrosion of a Porous Si2N2O-ZrO2
Composite Material", pp. 1572-1575 in Euro Ceramics V,
(extended abstracts), Key Engineering Materials, Vol. 132-136, Part
3, ed. by J. Baxter, L. Cot, R Fordham, V. Gabis, Y. Hellot, M.
Lefebvre, H. Le Doussal, A. Le Sech, R. Naslain and A. Sevagen,
Trans Tech Publications, Switzerland 1997. |
| 97-18kk |
Zhu B, Rundgren K and Mellander B-E,
"Ceramic Membranes – Potential Uses for Solid State Protonic
Conductors", Solid State Ionics 97, 385-391 (1997) |
| 97-19kk |
Kahlman L, "Engineering Ceramics for
Tribological Systems – Manufacture, Properties and Testing",
Ph D Thesis, Chalmers University of Technology/ Swedish Ceramic
Institute, Göteborg, 1997 (abstract). |
| 97-20kk |
Lesca S and Lyckfeldt O, "Protein
Forming of Silicon Nitride Materials". Report on work carried out within
the European Human Capital and Mobility Programme, SCI, 1997.
|
|
| 1996 |
| 96-1kk |
Heim M, Chen J,
O'Meara
C and Pompe R, "The Oxidation and Salt Corrosion of an Si2N2O-ZrO2
Composite Material", Ceram. Eng. & Sci. Proc. 17 [3]
443-453 (1996). |
| 96-2kk |
Brandt J and Lundberg R, "Processing of
Mullite-Based Long-Fibre Composites via Slurry Routes and by
Oxidation of an Al:Si Alloy Powder". J. Eur. Ceram. Soc., 16,
261-267 (1996). |
| 96-3kk |
Lyckfeldt O and Ferreira J M F,
"Processing of Porous Ceramics by a New Direct-Consolidation
Method", pp. XI.1.1-XI.1.5, in BioEng '96, Actas do 4o
Congresso Portugues de Engenharia Biomedica Abril 18-19, 1996, ed.
by Beatriz Sousa Santos, Jose Alberto Rafael, Ana Tome and Francisco
Vaz, Departamento de Electronica e Telecomunicac Sigmaes da
Universidade de Aveiro, SPEB-Sociedade Portuguesa de Engenharia
Biomedica, 3810, Aveiro, Portugal, 1996. |
| 96-4kk |
Carlsson R, "Swedish
Research Programmes and Industrial Activities on Ceramics", pp.
46-50 in Proceedings of International Workshop on Advanced Ceramics,
Science & Technology Agency and National Industrial Research
Institute of Nagoya, 1996. |
| 96-5kk |
Lyckfeldt O, "I - Processing of
Porous Ceramics by a New Direct-Consolidation Method", "I
- Casting of Materials with Porosity Gradients", and "III
- MgO Effects on Alumina Slip Properties". Work carried out
within the European Human Capital and Mobility Programme, SCI, 1996.
|
| 96-6kk |
Pompe R, "Vistelse som stipendiat vid
Kyushu National Industrial Research Institute (KNIRI) - mars
1996", KeramRapport 96-1, SCI, 1996. |
| 96-7kk |
Kahlman L, "Lubricated rolling devices, a
method for lubricating these and a composition suitable for such
lubrication", Swedish Patent SE 9600881-8 (1996). |
|
| 1995 |
| 95-1kk |
Warren A, Sjöstedt M and Carlström E,
"Thermal Debinding of Organic Binders from Injection Moulded
Hard Metal Components", pp. 570-576 in Proceedings of 1995
European Conference on Advanced PM Materials, Vol 1, 1995. |
| 95-2kk |
Nylund A, Tunberg T, Bertilsson H, Carlström E
and Olefjord I, "Injection Molding of Gas and Water-Atomized
Stainless Steel Powders", Int. J. of Powder Metallurgy, 31
[4] 365-373 (1995) |
| 95-3kk |
Heim M, Chen J, Arwin H and Pompe R, "High
Temperature Oxidation Behaviour of an Si2N2O-ZrO2
Composite", pp. 473-476 in proceedings of the 5th International
Symposium on Ceramic Materials and Components for Engines, ed. by D.
S. Yan, X. R. Fu and S.X. Shi, World Scientific, Singapore, 1995. |
| 95-4kk |
Kristoffersson A, Laarz E, Carlsson R and
Lundberg R, "Filament Winding of SiCfibre/Si3N4
Composites - Process and Control of Fibre Distribution", pp.
143-148 in Ceramic Transactions, Vol 58 "High-Temperature
Ceramic-Matrix Composites II: Manufacturing and Materials
Development", ed. by A.G. Evans and R. Naslain, The American
Ceramic Society, 1995. |
| 95-5kk |
Kristoffersson A and Carlström E,
"Solid-State-Sintered Silicon Carbide by Water-Based Tape
Casting", pp. 367-374 in Fourth Euro-Ceramics, Vol. 1
"Basic Science - Developments in Processing of Advanced
Ceramics, Part 1", ed. by C. Galassi, Gruppo Editoriale Faenza
Editrice S.p.A., 1995. |
| 95-6kk |
Lyckfeldt O, Lidén E and Kahlman L,
"Coating of Ceramic Components for Metal Inserting
Casting", pp. 243-250 in Fourth Euro-Ceramics, Vol. 9
"Coatings and Joinings", ed. by B. S. Tranchina and A.
Belossi, Gruppo Editoriale Faenza Editrice S.p.A., 1995. |
| 95-7kk |
Hansson T,
O'Meara
C, Rundgren K, Svensson P, Warren R and Wasén J, "Tensile
Creep of Alumina and SiC Whisker Reinforced Alumina", pp.
519-532 in "Plastic Deformation of Ceramics", ed. by R.C.
Bradt, C.A.Brookes and J.L. Routbort, Plenum Press (1995). |
| 95-8kk |
Lidén E, Carlström E, Eklund L, Nyberg B and
Carlsson R, "Homogeneous Distribution of Sintering Additives in
Liquid-Phase Sintered Silicon Carbide", J. Am. Ceram. Soc.,78
[7] 1761-1768 (1995) |
| 95-9kk |
Nyberg B, Eklund L, Carlström E and Carlsson
R, "Automated Image Analysis for Morphology Measurements and
Quantification of Whisker and Powder Materials", pp. 133-137 in
Ceramic Transactions, Vol. 51 "Ceramic Processing Science and
Technology", ed. by H. Hausner, G.L. Messing and S. Hirano, The
American Ceramic Society (1995). |
| 95-10kk |
Lyckfeldt O, Lidén E and Carlsson R:
"Processing of Thermal Insulation Materials with Controlled
Porosity", pp. 217-228 in Ceramic Transactions, Vol. 52
"Low-Expansion Materials", ed. by D.P. Stinton and S.Y.
Limaye, The American Ceramic Society (1995). |
| 95-11kk |
Bergström L, Lidén E and Nyberg B,
"Rheology and Processing of Al2O3-SiC
Whisker Composite Suspensions", pp. 391-395 in Ceramic
Transactions, Vol. 51 "Ceramic Processing Science and
Technology", ed. by H. Hausner, G.L. Messing and S. Hirano, The
American Ceramic Society (1995).
|
| 95-12kk |
Heim M, Arwin H, Chen J and Pompe R,
"Determination of Oxide Thickness on an Si2N2O-ZrO2
Composite by Spectroscopic Ellipsometry", J. Eur. Ceram. Soc., 15
[4] 313-318 (1995). |
| 95-13kk |
O'Meara
C, Heim M and Pompe R, "The Oxidation Behavior of a Porous Si2N2O-ZrO2
Composite Material", J. Eur. Ceram. Soc. 15 [4] 319-328
(1995). |
| 95-14kk |
Kristoffersson A and Carlström E,
"Tape Casting of Alumina in Water with an Acrylic Latex
Binder" pp. 151-154 in Extended Abstracts from the
International Conference on Shaping of Advanced Ceramics, Vito, Mol
(1995). |
| 95-15kk |
Lindqvist K and Lidén E, "Preparation of
Alumina Membranes by Tape Casting and Dip Coating", pp. 201-205
in Extended Abstracts from the International Conference on Shaping
of Advanced Ceramics, Vito, Mol (1995). |
| 95-16kk |
Kahlman L, Hollander E and Carlsson R,
"Thermal Spalling Wear and Mechanical Behaviour of Silicon
Carbides and Ceramic Composites". In Proceedings of 8th Cimtec,
World Ceramic Congress, ed. P. Vincenzini, Techna srl (1995). |
| 95-17kk |
Almgren J, Sumino H, Ueno F, Rundgren K and
Carlsson R, "Diffusion of Rare Earth Elements in AlN Ceramics
During Pressureless Sintering". In Proceedings of 8th Cimtec,
World Ceramic Congress, ed. by P. Vincenzini, Techna srl (1995). |
| 95-18kk |
Olsson M, Kahlman L and Nyberg B,
"Abrasive Wear of Some Structural Ceramics", Am. Ceram.
Soc. Bull., 74 [2] 48-52 (1995). |
| 95-19kk |
Rundgren K, Iwamoto Y, Mitsuoka T and
Matsubara H, "Mechanical and Microstructural Properties of
Silicon Nitride Based Ceramics", in Proceedings of the 14th
Basic Discussion of High Temperature Materials, Inuyama, 1995. |
| 95-20kk |
"Introducering och användning av
konstruktionskeramer i svensk industri", Slutrapport från Arbetsgruppen
för process-och verktygskeramer (NUTEK), SCI (1995). |
| 95-21kk |
Fauchère J-C, "Dispersion and
Stabilisation of an Alumina-Yttria-Stabilised Zirconia Slurry for
Pressure Slip Casting". Report on work carried out within the European
Human Capital and Mobility Programme, SCI, 1995. |
| 95-22kk |
Brandt J, Carlström E, Kristoffersson A and
Lindsten G, "Method for the Production of Solid Shaped
Bodies", Swedish Patent Application No. 9503413-8 (1995). |
|
|
